Project Description产品描述
Automatic high voltage capacitors bank
自动高压电容器柜组
Automatic HV capacitor banks are designed for applications where HV network power levels are variable. This type of equipment, with a number of steps usually between 2 and 4 to avoid consequent phenomena in the installation of the connection and disconnection of the capacitors in the electrical network, is controlled by a regulator type MCX, which timers and regulates the entry of the steps according to load levels, taking into account the waiting times of HV itself, which between consecutive connections is 600 s., this time can be reduced to less than 10 s. if we install fast discharge T.P.
自动高压电容器柜组设计用于高压可变电网功率电平的应用。这种类型的设备通常在2到4台之间，以避免在电网中的电容器的连接和断开安装过程中出现的现象，由MCX调节器控制，定时器和调节步进的入口。考虑到HV本身的等待时间和负载水平，在连续连接之间是600秒，如果我们安装快速放电电流互感器，这个时间可以减少到小于10秒。
These equipments are equipped with:
这些设备配备有：
- Metallic Enclosure.
金属外壳。 - APR fuses with fusion indicator (depending on mains voltage).
APR熔断指示器（取决于电源电压）。 - Vacuum or SF6 contactor / SF6 circuit breaker (depending on mains voltage).
真空或SF6接触器/SF6断路器（取决于电源电压）。 - Reactances for limiting the switching currents.
用于限制开关电流的电抗。 - Three-phase or single-phase HV capacitors LIFASA equipped with internal fuses (depending on the mains voltage).
三相或单相LIFASA高压电容器，配有内部熔断器（取决于电源电压）。 - Control panel including reactive power regulator, signals and maneuvers.
控制面板包括无功调节器/控制器、信号和动作。
Power range 功率范围
- From 50 kvar per step up to the requested power. Fully customizable.
从50kvar功率起，直到满足需求的概率。完全可定制。 - Up to 36 kV maximum insulation voltage.
最大绝缘电压可达到36KV
Prescription and equipment design
方案与设备设计
LIFASA, as a manufacturer of capacitors and compensation equipment, offers its experience and knowledge for the design and calculation of the most suitable solution for each installation.
作为电容器和补偿设备的制造商，LIFASA根据自己的经验和知识为每个安装提供设计和计算最合适的解决方案。