BATM

Project Description产品描述

Automatic capacitor banks BATM
BATM自动电容器柜

LIFASA automatic capacitor banks are used for centralized compensation of power factor in low voltage installations.
LIFASA自动电容器组用于低压装置中功率因数的集中补偿。

These equipments are supplied completely assembled and ready for use: it is only necessary to connect it to the mains with cables of adequate cross section, and to supply the operation signal from suitable current transformer. Wall mounting equipment. POLIMET capacitors.
这些设备是完全组装的,并且随时可以投入使用:只需要用合适横截面的电缆将其连接到电源上,并且从以下合适的电流互感器、墙壁安装设备。、POLIMET电容器等设备获得操作信号。

Accessories: Main switch or circuit breaker Qn>40kvar/440V H≥700mm; Leakage protection

附件:主开关或者断路器 Qn>40kvar/440V H≥700mm; 漏电保护

Rated voltages
额定电压
440 V 50 Hz – 60 Hz
Controller
控制器
MCE ADV
Working program
工作模式
5 options
Capacitors
电容器
POLB 440 V
Steps protection
保护模式
Magnetothermic / MCB
Degree of protection
防护等级
IP31
Colour
颜色
Gris RAL 7035
Cables entry
电缆进线
Bottom
Installation
安装
Indoor
Assembly
装配
Wall mounting
Aux. voltage 230V
辅助电压
Autotransformer
Circuit breaker
断路器
UpQn=40 kvar (…I)
External TI
外部TI
/5A (not included)

Other powers, voltages and frequencies on request.
其他功率,电压和频率可按要求定做。

FileDateSize
Datasheet
产品资料
11/04/20180.1 MB
Manual
说明书
30/05/20180.4 MB